A solenoid valve is an electromechanical device used for controlling liquid or gas flow. The solenoid valves are controlled by electrical current, which is run through a coil. When the coil is energized, a magnetic field is created, causing a plunger inside the coil to move. Depending on the design of the valve, the plunger will either open or close the valve. When electrical current is removed from the coil, the valve will return to its de-energized state.
In direct-acting solenoid valves, the plunger directly opens and closes an orifice inside the valve. In pilot-operated valves (also called the servo-type), the plunger opens and closes a pilot orifice. The inletline pressure, which is led through the pilot orifice, opens and closes the valve seal.
The most common solenoid valve has two ports: an inlet port and an outlet port. Advanced desigs may have three or more ports. Some designs utilize a manifold-type design.
Solenoid valves make automation of fluid and gas control possible. Modern solenoid valves offer fast operation, high reliability, long service life, and compact design.
|
 | 2 Way Piston Type Steam Solenoid Valves | | |
| | 2 way piston type steam solenoid valves | | | Actuation | 2 way piston type internal piolet operated | | Type | Normally close / open | | Size range | ¼ to 6 | | Body | CF8 | | Seals | Teflon (Viton / EPDM on request) | | Pressure | 8PSI to 180 PSI/ 280 PSI/ 1500 PSI | | Temperature | Upto 180 C | | Ends | Screwed / flanged / tricolver | | Media | Steam / Hot water/ High Temp Fluids | | Available volt. | All standard Voltage available. | |
| Low Pressure Solenoid Valves | | |
| | Low pressure Solenoid valves | | | Size range | 3/8 to 6 Inches | | Body | CF8 | | Diaphgram | Neoprene/ nitrile/ Teflon | | Pressure | 0 to 6 bar | | Temperature | -5 C to 85 C / 140 C (High temp. on Order) | | Ends | Screwed / flanged / tricolver | | Media | Air/ hot water oil, Gas & Vaccume | | Available volt. | All standard Voltage available | |
| 2/2 Diaphragm Type Solenoid Valves | | |
| | 2/2 Diaphragm type solenoid valves | | | Actuation | Diaphragm type internal pilot operated | | Type | Normally close / open | | Size range | ¼ to 6 | | Body | CF8/ Brass | | Diaphragm | Neoprene/ viton / teflon | | Pressure | 0.5 to 10 Bar | | Temperature | Upto 85 C (high temp. on Order) | | Ends | Screwed / flanged / tricolver | | Media | Air water Oil gas Vaccum etc. | | Available volt. | All standard Voltage available | |
| 2/2, 3/2 Way Direct Acting Solenoid Valves | | |
| | 2/2 – 3/2 way direct acting solenoid valves | | | Type | Normally close / open | | Size range | 1/4 , 3/8 & 1/2 | | Body | Brass Forged/ Alluminium/ S .Steel | | Pressure | Upto 70 Kg/Cm | | Temprature | -5 C to 85 C / (High temp. on Order) | | Media | Air, water, Oil, Gas, Vaccum etc. | | Available volt. | All standard Voltage available | |
| DISC Check valves | | |
| | DISC Check valves | | | Size range | ½ to 8 inches | | Body | CF8/ CF8M | | Disc | SS 304/ SS 316 | | Pressure | Metal to Metal, Soft seated | | Disc Seat | Standard | | Max. oper. press | Upto 42 Bar | | Max. Oper. Temp | Upto 300 C | | Testing | As per API 598 | |
| Dust Collector Solenoid Valves Pulse Valves | | |
| | Dust Collector Solenoid valves pulse valves | | | Size range | ½ to 3 Inches | | Body | Aluminum Die cast | | Diaphragm | Neoprene/ nitrile/ PU | | Press | 0.6 to 10 Bar | | Temperature | 80 C Max (Upto 125 C on request) | | Available voltage | All standard Voltage available | |
| 3/2 & 5/2 Push Pull & Push Button Valves | | |
| | 3/2 & 5/2 Push Pull & push button Valves | | | Size | 1/8 , ¼ & ½ BSP/NPT | | Pressure | Upto 10Kg/Cm | | Media | Air | | | | |
| 3/2 & 5/2 Steam Actuated Roller Valves | | |
| | 3/2 & 5/2 Steam Actuated Roller Valves | | | Size | ¼ BSP/ NPT | | Pressure | Upto 10Kg/Cm | | Media | Air | | | | |
| Special Regulator (Solenoids Valves) | | |
| | Special regulator | | | Size | ¼ & ½, ¾& 1 | | Body | Alluminium press Die Cast/ forged brass | | Pressure | Upto 10 / 28 / 42 Kg/Cm | | Media | Air | |
| Solenoids & Control Valves | | |
| Our range of solenoids and control valves is procured from the well established vendors of the market such as Avcon, Festo, Hawa, Indfos, Sismic, and others. Our product range is available in direct acting, diphragm type, piston-operated, poppet type and pneumatic cylinder-operated 2/3/4/5 way valves ideally suited for air, oil, water and steam applications. Quality tested through rigorous quality parameter according to international quality standard, these valves provide utmost satisfaction to the clients. |
| 3/2, 5/2, & 5/3 Single / Double Solenoid Valves | | |
| Models : spool type/ Poppet Types
Sizes: 1/4, 3/8, 1/2
Pressure: Up to 10 kg/cm02
Coil: all standard voltages available
|
|
|
